K.U.L. – College ‘De Valk’
Booth 2 & 3
LMS Papers:
Monday September 20, 2010
13:25 Medium and high frequency techniques – Room MHF1
583 Fast Multipole BEM Modeling of Head Related Transfer Functions of a Dummy Head and Torso
Peter Fiala, Budapest University of Technology and Economics, Hungary
Jacobus Huijssen, KU Leuven, Belgium
Bert Pluymers, K.U.Leuven, Belgium
Raphael Hallez, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium
14:15 Aeroacoustics and flow noise – Room AAI
690 A Geometrical Near-Field Extension of Amiet’s Theory for Incoming Turbulence Noise and Broadband Noise Scattering
Korcan Kucukcoskun, LMS International, Belgium
Julien Christophe, Christophe Schram, Von Karman Institute for Fluid Dynamics, Belgium
Michel Tournour, LMS International, Belgium
Jerome Anthoine, ONERA, France
14:15 Lightweight panels and structures (special session, prof. S. De Rosa) – Room LWI
343 Static and dynamic testing of the full scale helicopter rotor blades
Marcin Luczak, Bart Peeters, Kajetan Dziedziech, LMS International, Belgium
15:30 Vehicle concept modelling (special session, prof. M. Pierini, dr. S. Donders) – Room VCM1
226 Advanced vehicle body concept modelling approach using reduced models of beams and joints
Giambattista Stigliano, LMS International, Belgium
Domenico Mundo, University of Calabria, Italy
Stijn Donders, LMS International, Belgium
Tommaso Tamarozzi, K.U. Leuven, Italy
17:10 Monitoring and diagnostics of rotating machinery – Room RMMI
456 Zebra Tape Butt Joint Correction Algorithm for Rotating Shafts with Torsional Vibrations
Karl Janssens, Piet Van Vlierberghe, Wilfried Claes, Bart Peeters, Ton Martens, Philippe D’Hondt, LMS International, Belgium
17:35 Vehicle concept modelling (special session, prof. M. Pierini, dr. S. Donders) – Room VCM1
515 Investigating the use of reduction techniques in concept modeling for vehicle body design optimization
Tommaso Tamarozzi, K.U. Leuven, Italy
Giambattista Stigliano, Marco Gubitosa, Stijn Donders, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium
18:00 USD - Fuzzy and interval methods – Room USDF
624 Optimization study of a vehicle bumper subsystem subject to uncertainty
Laszlo Farkas, Stijn Donders, LMS International, Belgium
Danny Schildermans, PUNCH Metals N.V., Belgium
David Moens, K.U. Leuven, Belgium
Tuesday September 21
09:15 Modal testing: methods and case studies – Room MTC2
631 Flexible shaker excitation signals for improved FRF estimation and and non-linearity assessment
Mauro Gatto, University of Rome "La Sapienza", Italy
Bart Peeters, LMS International, Belgium
Giuliano Coppotelli, University of Rome "La Sapienza", Italy
11:45 Modal testing: methods and case studies – Room MTC3
46 Global static and dynamic car body stiffness based on a single experimental modal analysis test
Jan Helsen, KULeuven, Belgium
Luc Cremers, BMW AG, Germany
Peter Mas, LMS International, Belgium
Paul Sas, K.U.Leuven, Belgium
14:00 Acoustic testing – Room POS3
607 Experimental analysis of the Very Near Field produced by different acoustic sources
Leonardo Soria, Valeria Cecilia Belgiovine, Politecnico di BARI, Italy
Pieter Aarnoutse, LMS International n.v., Belgium
Herman Van der Auweraer, LMS International, Belgium
Karl Janssens, LMS International n.v., Belgium
14:25 Vibro-acoustic modelling and prediction - Room VAM2
166 Efficient method to avoid fictitious eigenvalues for indirect BEM
Roberto D’Amico, Alessandro Pratellesi, Marco Pierini, Università degli Studi di Firenze, Italy
Michel Tournour, LMS International, Belgium
16:55 Adaptronics (special session, prof. T. Bein) – Room ADAP1
457 Active Sound Quality Control of Vehicle Interior Sound
Marco Gallo, Yuta Komiya, Karl Janssens, Jan Anthonis, Herman Van der Auweraer, LMS International, Belgium
Leopoldo de Oliveira, University of Sao Paulo, Brazil
16:55 Multi-body dynamics and control – Room MB1
227 Gear noise evaluation through multibody TE-based simulations
Antonio Palermo, Domenico Mundo, University of Calabria, Italy
Antonino Sergio Lentini, Rabah Hadjit, Peter Mas, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium
Wednesday September 22
08:50 Modal testing: methods and case studies - Room MTC3
560 Identification of elastic and damping properties of sandwich structures using high resolution modal analysis.
Marc Rébillat, Xavier Boutillon, LMS, France
08:50 Vehicle concept modelling (special session, prof. M. Pierini, dr. S. Donders) - Room POS4
604 Conceptual and reduced vehicle models performances enhancement through parameter estimation and neural-networks coupling
Marco Gubitosa, Takatoshi Tsukano, Stijn Donders, LMS International, Belgium
Wim Desmet, K.U.Leuven, Belgium
9:40 Transfer path analysis and source identification - Room TPA1
243 On the accuracy reciprocal and direct vibro-acoustic transfer-function measurements on vehicles for lower and medium frequencies.
Christophe Coster, Daisuke Nagahata, Peter J. G. van der Linden, LMS International nv, Belgium
10:05 Wind turbine vibrations - Room WTV1
627 Full-scale multibody modeling of a wind turbine based on experimental data
Simone Manzato, Bart Peeters, Alessandro Toso, LMS International, Belgium
Richard Osgood, Gunjit Bir, Heena Mutha, NREL, United States
10:30 Transfer path analysis and source identification - Room TPA1
31 Application of the Transmissibility Concept in Transfer Path Analysis
Peter Gajdatsy, K. U. Leuven, Belgium
Karl Janssens, LMS International n.v., Belgium
Wim Desmet, K.U.Leuven, Belgium
Herman Van der Auweraer, LMS International, Belgium
11:20 Inverse methods - load identification - Room INV1
446 Estimation of the injected structure-borne sound power using inversely measured contact forces
Pieter Schevenels, Belgian Building Research Institute, Belgium
Peter van der Linden, Qsources BVBA, Belgium
Gerrit Vermeir, K.U.Leuven, Belgium
12:10 Adaptronics (special session, prof. T. Bein) - Room ADAP2
439 An Operational Modal Analysis approach for the performance assessment of passenger car active suspension systems
Leonardo Soria, Politecnico di BARI, Italy
Arnaldo delli Carri, Università degli Studi di BRESCIA, Italy
Bart Peeters, Jan Anthonis, Herman Van der Auweraer, LMS International, Belgium
15:15 Vehicle dynamics - Room VDI
626 Vibrational comfort analysis of a multibodyvirtual dummy for car and motorcycle users
Nicola Cofelice, Roberto Zanni, Alessandro Toso, LMS International, Belgium
David Moreno Giner, LMS international, Belgium
Jian Kang, Stijn Donders, LMS International, Belgium
16:05 FP7 ITN MID-FREQUENCY session – CAE methodologies for mid-frequency analysis in vibration and acoustics - Room MHFITN
497 New insights of an energy flow visualization into vehicle design
Giambattista Stigliano, Marcos Souza Lenzi, LMS International, Belgium
Bert Pluymers, K.U.L., Belgium
Patrik Ragnarsson, K.U. Leuven, Belgium
Stijn Donders, Marc Brughmans, LMS International, Belgium
