Back Share

LMS Test.Lab Mobile Testing Overview

LMS Test.Lab Mobile Testing - Introduction

LMS Test.Lab Mobile Testing - Introduction

Powering mobile productivityEver-shorter development cycles and higher quality requirements put growing pressure on field testing teams. The increasing number and complexity of test campaigns forces them to continuously push their productivity limits. Field engineers have to collect as much data as possible and perform complex tests, often under difficult operating conditions. LMS Test.Lab Mobile is designed for high field testing productivity. It combines a complete set of noise and vibration ...

Integrated acquisition and analysis capabilities

Integrated acquisition and analysis capabilities

Signature testing Fixed-sampled data can be acquired, tracked against rpm (e.g. full-vehicle assessment), speed, time or any slowly varying parameter when performing runup or coastdown tests (e.g. cabin comfort) or averaged under stationary operating conditions (e.g. engine idling). Real-time processing enables operators to benchmark any processing result on-line (e.g. single order/octave/ frequency sections, spectral/order/octave maps, levelevaluation, etc.), or to collect a wide variety of high-quality ...

LMS Test.Lab 16 Channel Harmonic Analysis

LMS Test.Lab 16 Channel Harmonic Analysis

Versatile system for laboratory and mobile testing of rotating machinery harmonic analysis The LMS Test.Lab 16 Channel Harmonic Analysis system offers online and offline order analysis based on narrow-band waterfall spectra and color-maps, measured on rotating equipment in operating conditions. Data acquisition is conducted on the SCADAS Mobile front-end with two embedded tacho inputs, supporting 16 channels for ICP® and Voltage signals (including quasi-static parameters), which can be ...

LMS Test.Lab 24 Channel Tracked Operational Deflection Shape Analysis

LMS Test.Lab 24 Channel Tracked Operational Deflection Shape Analysis

System for analysis of rotating machinery in operation -LMS Test.Lab Operational Deflection Shape Analysis provides a solution to measure and visualize the structural deformation of rotating machinery in operation. The animated vibration patterns can be analyzed as time-history, at selected fixed frequencies or tracked against rotational speed or any other operational parameter. Measurements are made using a the LMS SCADAS Mobile front-end with 2 embedded tacho inputs, configured with ...

LMS Test.Lab 16 Channel Mobile Time Data¨Processing and Recording

LMS Test.Lab 16 Channel Mobile Time Data¨Processing and Recording

Mobile system for operational NVH Engineering and benchmarking of rotating machinery The LMS Test.Lab 16 Channel Mobile Time Data Processing and Recording system provides a dedicated solution for mobile NVH Engineering and benchmarking of rotating machinery. It stores raw time data histories for offline processing, while providing comprehensive online analysis functionality. The data acquisition is ...

Back Share

Do you have a technical or commercial question?

» News

LMS Test.Lab Rev 8 delivers increased productivity and breakthrough capabilities

LMS Virtual.Lab Motion Rev 7 strengthens simulation capability for vehicle handling and ride comfort

» Application Cases

Ford Uses Hybrid Simulation to Accelerate Powertrain NVH Engineering

EADS Increases Productivity of Vibration Qualification Tests with LMS

Audi Moves Forward with Early Durability Predictions

LMS Solutions guide